AX Section V-Belt AX20

AX Section V-Belt | Sizes AX20 - AX59

Toothed belts, also known as molded cogged belts, are flexible V-belts with teeth on the inner surface. These teeth reduce bending stress, increase efficiency, and promote cooler operation. They can be used on the same pulleys as wrap construction belts. Toothed belts are widely used for high-power transmission in applications such as compressors, pumps, fans, blowers, generators, and industrial drives.

These premium aftermarket belt, crafted to surpass industry standards. Certified in ISO/TS16949:2016 and ISO 14001 OHSAS 18001, our belts excel in safety and performance. From fire-resistant to anti-static, our comprehensive range meets 'essential' Health and Safety norms. Expect reliability, durability, and peace of mind with our belts—your seamless replacement solution.

• Higher power transmission capacity than wrapped Belts
• Special cog design for enhanced flexibility and heat dissipation rate
• Suitable for drives using smaller diameter pulleys and high RPM
• Anti-static, oil & heat resistant

Maximum Belt linear speed (Classical section: up to 30 m/Sec, Wedge: up to 42 m/Sec, Narrow: up to 45 m/Sec)

Temperature range: -25°C to +100°C
______________________________________________________________

Sizing:
Belts are measured on the internal circumference

 Each belt number increases in 1" increments and are measured Li (Length inside)
The difference between the inside and outside circumference is 2"
'AX' Section Belts 1/2" 13mm Top Width
______________________________________________________________

How to Select:
Select the belt size you require by clicking the drop-down menu. 
Pricing adjusts according to the belt size selected
______________________________________________________________

All parts should be fitted by a licensed technician.

Please note:
Due to supply issues some belt sizes are unavailable in PIX brand and have been substituted with Allwyn brand.